HY-QG-1 Computerized Panel Cutter Machine
Purpose: It is used to crosscut, and edge trim the quilted fabric, and usually works in tandem with the quilting machine and rolling device, but it can also run alone.
Detail Information
- Equipped with a lock stitch quilting machine, adapted relatively thin materials like polyester wadding
- With 7-inch touch screen, large interface, easy operation
- Edge trimming by two round blades works like scissors, thus the waste materials can be quite narrow and separate from the other materials
- Slitting by round blades to squeeze , a much safer operation
- Feed-out by conveyor, easy folding the materials, and labor saving
- Y-dimension with length encoder, which enables to cut of both short and long materials
- Integrated machine body and conveyor design, compact structure saving installation space.
| Parameter(Unit mm) | HY-QG-1 | |
Edge trim | The Max.X dimension | 2250 |
| The Min.X dimension | 1100 | |
Slitters | The Max.X dimension | NO |
| The Min.X dimension | NO | |
Cross cut | The Max.Y dimension | 2300 |
| The Min.Y dimension | 500 | |
| Parameter(Unit mm) | HY-QG-1 | |
| Dimension(LWH) | 3580×1030×1700 | |
| Operating air preasure | 0.4~0.8Mpa | |
| Thickness | 3~60 | |
| Speed | 9.5(M/Min) | |
| Total power required | 1.5KW | |
| Power supply | 380V/50HZ 220V/60HZ | |
| Weight | 1500kg | |
Installation Layout
PRODUCT DESIGN
